8
If the generator should malfunction, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock.
SAFETY
DANGER
Improper grounding can result in a risk of
electrocution. Check with a qualied electrician for
your local requirements if you are in doubt as to
whether the unit is properly grounded.
This generator is equipped with a grounding terminal for added
protection. Using the ground path from the generator to an external
ground source as instructed in the section labeled “Grounding
Instructions” in the CONTROL FUNTION section of this manual
can be necessary. Please consult a qualied electrician for local
regulations.
The generator is a potential source of electrical shock if not kept dry.
Keep the generator dry and do not use in rain or wet conditions. To
protect from moisture, operate it on a dry surface under an open,
canopy-like structure. Dry your hands if wet before touching the
generator.
Plug appliances directly into the generator. Or, use a heavy duty,
outdoor-rated extension cord that is rated (in watts or amps) at least
equal to the sum of the connected appliance loads. Check that the
entire cord is free of cuts or tears and that the plug has all three
prongs,especially a grounding pin.
NEVER try to power the house wiring by plugging the generator into
a wall outlet, a practice known as “back feeding”. This is an
extremely dangerous practice that presents an electrocution risk to
utility workers and neighbors served by the same utility transformer.
It also bypasses some of the built-in household circuit protection
devices.
If you must connect the generator to the house wiring to power
appliances, have a qualied electrician install the appropriate
equipment in accordance with local electrical codes.
To Next Page
Loading...
Need help?
General
