EC-PM-80320 User's Manual
- 8 -
2.5.2.2 The Operating System of Windows 8
The hand-operated installing steps of parallel interface, serial interface or USB interface:
1. Enter “Control Panel” → “Device and Printers”.
2. Click “Add Printer”, then a window of “Add Printer Wizard” pops up, then click “Next”, select “Add
Local printer Manually” in the “Local or Network Printer” window.
3. A window of “Select a Printer Port” pops up, according to your requirement, click “Use the
Current Port”, select “LPT1: (Printer Port)”, serial interface or USB interface, click “Next”.
4. A window of “Install Printer Driver” pops up, click “Have Disk...”.
5. A window of “Install From Disk” pops up. Please according to the operating system environment,
you should select the path as follows: CD-ROM → “Drivers” →“Windows 8”, click “Open”, then
click “OK” to return to the window of “Install Printer Driver”, click “Next”.
6. Follow the guide and click “Next” gradually till the installation is finished.
2.5.2.3 The Operating System of Windows 98
(1) The installing steps of a serial interface cable:
1. Click “Start” → “Settings” → “Printers”.
2. Double click “Add Printer”, then a window of “Add Printer Wizard” pops up, select “Local Printer”
in the “Local or Network Printer” window, then click “Next”.
3. A window of “Click the manufacturer and model of your printer” pops up, click “Have Disk...”,
please click “Browse”, select the path as follows: CD-ROM → “Drivers” → “WIN98 (WINME)”,
then click “OK”.
4. A window of “Install From Disk” pops up, click "OK, return to a window of “Add Printer Wizard”,
then click "Next".
5. A window of “Printer Port” pops up, select “Available ports”, according to your requirement,
select “serial interface”, click “Next”, and then the printer’s name will be shown. If the system has
not installed other printer driver process, the printer is treated as default printer by the application
process of Window98 environment, click “Next”. Otherwise, according to prompt, choose the
printer as default printer: “Yes”, click “Next”, choose “Yes-(recommended)”, click “Finish”. A
window of “Printer test page completed” pops up, click “Yes”.
6. The printer driver process is installed successfully.
(2) The installing steps with the USB interface cable:
USB driver installing steps:
1. Connect with the USB interface cable and turn on the printer.
2. After the computer finds out new hardware and finishes searching, a window of “Add New
Hardware Wizard” pops up, click “Next”.
3. A window of “Add New Hardware Wizard” — “Windows Operation” pops up, choose “Search
the best driver for the device (recommended)”, and click “Next”.
4. A window of “Add New Hardware Wizard” pops up, check “Specify a location (L)”, click
“Browse”, select the path as follows: CD-ROM → “Drivers”→“WIN98 (WINME)” →”USB driver”,
then click “OK”.
5. Return to the window of “Add New Hardware Wizard”, click “Next”; a window of “Windows
Note: 1. As the system of Windows 98/ME doesn’t integrate USB driver control, please
install USB driver before using USB interface printing. Then install USB printer
driver.
2. If it has installed the USB driver, please install the USB printer driver directly by
the following steps.
To Next Page
