EC-PM-80320 User's Manual
- 3 -
Chapter 2 Installing the Printer
2.1 Unpacking & Checking
Check the following items in the package, if any of these items is missing, please contact your dealer.
2.2 Unpacking the Protective Materials
1. Open the packing box, take out the printer.
2. Save all the original packing materials so that they can be used when transporting the printer.
2.3 Connecting to Your Computer or Other Equipment
The printer is configured with a cash drawer interface and one data interface (Parallel interface, USB
interface, Serial + USB interface, Ethernet + USB interface, USB interface + Bluetooth or USB
interface + Wi-Fi). (Please take the specific interface as standard). Connect the printer to your
computer with the correct cable.
2.3.1 Connecting the Cash Drawer Cable
Turn off the printer and plug the cash drawer cable into the cash drawer interface on the back of the
printer and the other end to the cash drawer, as shown in Figure 2-2.
Figure 2-1 Packing items
Note: Models with Bluetooth and Wi-Fi are not equipped with interface cable.
Driver CD
(Including User's Manual and Driver)
Printer
Power Cord
Interface Cable (Optional)
Note: Before connecting or disconnecting the cash drawer cable, parallel interface cable or
serial interface cable, make sure that the power of the printer is turned off. Also make
sure the power cable plug is disconnected from the AC outlet. Or else it may damage
the printer.
To Next Page
Loading...