EcLine EC-PM-80320D - Chapter 7 Control Commands; General; Explanation of Terms

EC-PM-80320 User's Manual
- 51 -
Chapter 7 Control Commands
7.1 General
The commands EC-PM-80320 supplies are based on ESC/POS.
The format described as following:
Command Function
Format: ASCII: Indicates the ASCII equivalents
Decimal: Indicates the decimal equivalents
Hex: Written in hexadecimal code
Description: The function and using instruction of that command.
Example: Some examples are listed for easier understanding.
7.2 Explanation of Terms
BEL Beeper
Format: ASCII: BEL
Decimal: 7
Hex: 07
Description:
Active the printer buzzer
HT Horizontal tab
Format: ASCII: HT
Decimal: 9
Hex: O9
Description:
Move the print position to the next horizontal tab position
LF Print and line feed
Format: ASCII: LF
Decimal: 10
Hex: OA
Description:
Print the data in the print buffer and feed one line based on the current line spacing.
FF Print and Feed to next black mark position
Format: ASCII: FF
Decimal: 12
Hex: OC
Description:
Print the data in the print buffer and feeds paper to the print starting position on the next black mark
position when black mark takes effect.