EC-PM-80320 User's Manual
- 13 -
7. Set the printer driver print port as the outgoing port and the installation is finished.
2.8 Ethernet Settings
Please use EC network setting software NetFinder to set the IP address for EC printers, which can
be found in the CD or downloaded from www.ecline.com.mx
.
2.8.1 Connecting Printer
Power on the printer, connect with the Ethernet interface cable which has been connected to LAN,
and look into the information of Ethernet LED to ensure the printer has entered the normal
connection.
2.8.2 Setting IP Address
1. Run NetFinder Software
Double click NetFinder.exe in the PC which connects the printer in the same LAN. The figure of
the software is shown as follows:
Yellow LED Green LED Description
ON Blink Online
OFF OFF Offline
Note: Every Bluetooth device has its own address. Please reinstall it when replacing the
Bluetooth device.
Caution: The network printing function needs the operating systems of Windows2000 and
above and the operating systems of Window 98/ME and below are not supported.
To Next Page
