ESN (Key CD) security operating
procedure
How to program the Key CD
1 .
Check that the Power is OFF.
2 .
Press and hold button [1], then the [FUNC]
button, and hold both for more than one
second.
A [SEC] message appears, then in two seconds it will
change to [DISC].
The front panel opens; the CD8051 is now ready to
accept your Key CD in the CD slot.
3 .
Insert the CD into the slot.
The front panel closes.
A [SEC] message appears, the front panel opens, then
the Key CD is ejected.
To Next Page
Loading...
