61
How to use the NOB remote control
Turning the power on/off
When the power is turned on, the state used when the power
was turned off such as CD and tuner playing is restored.
1 .
Press the [PWR] button.
The power turns on or off each time the button is pressed.
When the main unit is shut down, the remote control will not
work.
Adjusting the audio volume
1 .
Press the [AUDIO CONTROL] button, and turn
it to the left or right.
Each press of the button will switch the audio control
modes.
Turn to the right: Increases the volume.
Turn to the left : Decreases the volume.
Cutting the volume instantly (muting):
Press the [MUTE] button for more than two seconds to cut
the volume or restore it instantly.
Press the [MUTE] button for more than two seconds if E-
COM is connected and less than two seconds if E-COM is
not connected to cut the volume or restore it instantly.
To Next Page
Loading...
Need help?
General
