Eclipse CD8051 - How to Operate the Receiver with an Optional DSP;EQ Unit or Digital Sound Processor Connected; How to Operate the DSP Functions

77
How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected
 How to operate the receiver with
an optional DSP/EQ unit or Digital
Sound Processor connected
 How to operate the DSP functions
The DSP feature adds reverberations to simulate ambience in
different types of surroundings (room sizes).
1 . After pressing the [FUNC] button, tap button
[1].
Each tap of the button [1] will switch the room size.
 Switching room sizes
1. Tap button [1] to switch room sizes for less than one
second.
Six room sizes are available for selection in the following
sequence:
1. CONCERT (a concert hall)
2. LIVE (a live house)
3. CATHEDRAL (a church with rich reverberations)
4. STADIUM (an outdoor stadium)
5. CLUB
6. DEFEAT (DSP OFF)
2.
Push the [FUNC] button.
This cancels the adjustment mode; the selected room
size will now take effect.
[FUNC] button
Button [1]