3 .
Select any button, from [1] to [6], and press it
for more than two seconds.
The tuned station is now memorized and set in the
button selected. Repeat the procedure to set additional
manually tuned stations in memory, in turn, for buttons
[1] to [6]. These buttons are called the preset buttons.
Caution
If the vehicle’s battery is disconnected (for repairs to the
vehicle or for removing the receiver), all stations in memory
will be lost. In such a case, set stations in memory again.
Preset station scan
This function enables reception of all the stations in the
preset buttons for five seconds each.
1 .
Press the [MODE] button for less than two
seconds.
[P SCAN] will appear at the top of the display, and
stations stored under preset buttons [1] through [6] will
be played for five seconds each.
2 .
To stop the preset scan mode at a desired
station, press the [MODE] button again.
The receiver will stay tuned to the desired station.
To Next Page
Loading...
Need help?
General
