33
Basic operation
Disabling the display
1. Press the [FUNC] button.
2. Press the [ BND ] button.
Press the button repeatedly until [DISPLAY] appears on
the screen.
3. Press the [SOURCE] button to switch ON/OFF of
DISPLAY.
4. Press the [FUNC] button again.
Switching the dimming level
The brightness of the display is switched.
1. Press the [FUNC] button.
2. Press the [ BND ] button until [DIMMER]
appears on the screen.
3. Switch the dimming level by pressing the
[SOURCE] button.
4. Press the [FUNC] button to cancel the function
mode so that the settings are enabled.
Disabling the Tone Control feature
1. Press the [FUNC] button.
2. Press the [ BND ] button repeatedly until [TONE]
appears on the screen.
3. Press the [SOURCE] button to switch ON/OFF.
4. Press the [FUNC] button.
Pressing the button will cancel Function mode.
To Next Page
Loading...
Need help?
General
