How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected
8080
Selecting a preset pattern from memory
Press a preset button to select the room size in memory.
The buttons under which room sizes are stored in memory
are called preset buttons.
1.
After pressing the [FUNC] button, hold
button [1]
down for more than one second.
2. Press a button, [1] to [6] for less than two seconds.
The room size, as preset in the button, is selected.
3. Press the
[FUNC] button to cancel the DSP
adjustment mode
.
To Next Page
Loading...
Need help?
General
