Eclipse CD8051 User Manual

85
Buttons [1] to [3]
[FUNC] button
Button [6]
[AUDIO CONTROL]
button
How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected
 How to operate the Digital Sound
Processor
Music can be enjoyed more comfortably by modifying the
speaker settings.
 Setting the speaker size
The size of each speaker is switched.
1. Press the [FUNC] button.
2. Press and hold button [3] for more than two
seconds to shift to the setting mode.
3. Press button [1] to shift to the speaker setting
mode.
4. Switch the settings by pressing the button
corresponding to each speaker.
Button [1]: Front speaker
Large/small
Button [2]: Rear speaker
Large/small/none
Button [3]: Center speaker
Large/small/none
Button [4]: Woofer speaker
Yes/no
5. Press the [FUNC] button to return to the setting
mode.
6. Press the [FUNC] button again to cancel the setting
mode.

Eclipse CD8051 Specifications

General

Brand	Eclipse
Model	CD8051
Category	Car Receiver
Language	English