7.1.1 Pump head replacement
WARNING!
Risk of slipping due to fluid in the operation and provisioning area!
– Wear non-slip, chemically resistant shoes when working.
– Place product containers in a tank to prevent a slipping hazard caused by
leaking fluids.
DANGER!
It is essential that that hands are washed prior to work breaks and at the end of
the working day. Information about the usual precautions when handling
chemicals and about the use of PPE can be found on the relevant safety data
sheet for the chemical being used and must be complied with.
ENVIRONMENT!
Leaked, spilled dosing media can harm the environment.
Leaked, spilled dosing media must be cleaned and disposed of correctly,
according to the instructions on the product data sheet. It is essential to ensure
that the required personal protective equipment is used.
Preventive action:
– Place product containers in a tank to collect leaking fluids without harming
the environment.
DANGER!
Before replacing the pump head, the dispensing medium must be removed and
all lines sufficiently flushed. Excess pressure in the pressure line must be
released. Disassembled suction and pressure lines may drip – wrap lines with
absorbent, lint-free cloth!
Maintenance and Spare parts
36Rev. 5-06.2018
To Next Page
Loading...
Need help?
General
