BAT-I2 USER MANUAL
40
Chapter 3
fSerial Port 2 Configuration
Scroll to this item and press <Enter> and view the following screen.
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=2F8h; IRQ=3)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
+/- : Change Opt.
Enter : Select
lk
mn
:Select Screen
:Select Item
Serial Port 2 Configuration
Serial Port [Enabled]
Device Settings IO=2F8h; IRQ=3;
Change Settings [Auto]
F1:General Help
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
Press <Esc> to return to the Super IO Configuration page.
Main Advanced Chipset M.I.B III Security Boot Exit
To Next Page
Loading...
Need help?
General
