43
Typematic Rate Setting (Disabled)
If this item is enabled, you can use the following two items to
set the typematic rate and the typematic delay settings for
your keyboard.
• Typematic Rate (Chars/Sec): Use this item to define
how many characters per second are generated by a
held-down key.
• Typematic Delay (Msec): Use this item to define how
many milliseconds must elapse before a held-down
key begins generating repeat characters.
Security Option (Setup)
If you have installed password protection, this item defines if
the password is required at system start up, or if it is only re-
quired when a user tries to enter the Setup Utility.
APIC Mode (Enabled)
This item allows you to enable APIC (Advanced Programma-
ble Interrupt Controller) functionality. APIC is an Intel chip that
provides symmetric multiprocessing (SMP) for its Pentium
systems.
OS Select For DRAM > 64 MB (Non-OS2)
This item is only required if you have installed more than 64
MB of memory and you are running the OS/2 operating sys-
tem. Otherwise, leave this item at the default.
HDD S.M.A.R.T Capability (Disabled)
The S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting
Technology) system is a diagnostics technology that monitors
and predicts device performance. S.M.A.R.T. software resides
on both the disk drive and the host computer.
The disk drive software monitors the internal performance of
the motors, media, heads, and electronics of the drive. The
host software monitors the overall reliability status of the drive.
If a device failure is predicted, the host software, through the
Client WORKS S.M.A.R.T applet, warns the user of the im-
pending condition and advises appropriate action to protect
the data.
Report No FDD For WIN95 (Yes)
If you are running a system with no floppy drive and using
To Next Page
Loading...
