61
Frequency/Voltage Control
This item enables you to set the clock speed and system bus
for your system. The clock speed and system bus are deter-
mined by the kind of processor you have installed in your
system.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Frequency/Voltage Control
Item Help
Auto Detect DIMM/PCI Clk [Enabled]
Spread Spectrum Modulated [Enabled]
CPU Host/PCI Clock [Default]
CPU Vcore Voltage [Default]
Menu Level
↑
↓
→
←
: Move Enter : Select +/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal
of free DIMM and PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the
EMI (Electro-Magnetic Interference) generated by the system.
CPU Host Clock (CPU/PCI) (Default)
Use the CPU Host Clock to set the frontside bus frequency for
the installed processor or processors (usually 133 MHz, 100
MHz or 66 MHz).
CPU Vcore Voltage (Default)
Use this item to set the CPU Vcore without using the CPU in-
ternal value.
Note: Modifying the CPU Vcore Voltage may cause the
system to become unstable. Use caution and proceed
at your own risk.
To Next Page
Loading...
