ECS K7S6A - Pm Wake up Events

57
PM Wake Up Events
Scroll to this item and press <Enter> to view the following
screen:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
PM Wake Up Events
Item Help
IRQ [3-7, 9-15], NMI [Enabled]
IRQ 8 Break suspend [Disabled]
Ring Power Up Control [Enabled]
PCIPME Power Up Control [Disabled]
Power Up by Alarm [Disabled]
x Month Alarm NA
x Date (of Month) 0
x Time (hh:mm:ss) 0 0 0
Menu Level
↑ ↓ → ← : Move Enter : Select +/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
This item opens a submenu that enables you to set events
that will resume the system from a power saving mode.
IRQ [3-7, 9-15], NMI (Enabled)
This option determines whether any activity for IRQ 3-7/9-15
will cause the system to wake from a power saving mode.
IRQ 8 Break Suspend
Determines whether the system will monitor IRQ 8 activity and
wake the system from a power saving mode when IRQ 8 is
activated.
Ring Power Up Control (Enabled)
Use this item to enable LAN or modem activity to wakeup the
system from a power saving mode.
PCIPME Power Up Control (Disabled)
Use this item to enable PCI activity to wakeup the system
from a power saving mode.
Power Up by Alarm (Disabled)
When set to Enabled, the following three fields become avail-
able: Month Alarm, Day of Month Alarm, and Time Alarm
Upon arrival of the alarm time, it will instruct the system to
wake up. When set to 0 (zero) for the day of the month, the