47
Advanced DRAM control 2
Scroll to this item and press <Enter> to view the following
screen:
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Advanced DRAM Control 2
Item Help
CS[5:0]# Hold Time CTL [+0.5 ns]
DQS/CSB Hold Time CTL [+0.5 ns]
CKE Hold Time CTL [+0.5 ns]
Menu Level
↑
↓
→
←
: Move Enter : Select +/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
CS[5:0]# Hold Time CTL (+0.5 ns)
This option allows you to set the CS Hold Time. Valid values
are +.05 ns, +.1.0 ns, +1.5 ns, and +2.0 ns.
DQS/CSB Hold Time CTL (+0.5 ns)
This option allows you to set the DQS/CSB Hold Time. Valid
values are +.05 ns, +.1.0 ns, +1.5 ns, and +2.0 ns.
CKE Hold Time CTL (+0.5 ns)
This option allows you to set the CKE Hold Time. Valid values
are +.05 ns, +.1.0 ns, +1.5 ns, and +2.0 ns.
Memory Hole at 15M-16M (Disabled)
This item is used to reserve memory space for ISA expansion
cards that require it.
AGP Fast Write Control (Enabled)
This item allows you to enable or disable the caching of dis-
play data for the video memory of the processor. Enabling can
greatly improve the display speed. If your graphics display
card does not support this feature, you need to disable this
item.
To Next Page
Loading...
