SONOTRAX(2009) Series Ultrasonic Pocket Doppler User Manual
34
Figure 3-6 Removing the probe
Replace it with a new probe:
Put the USB socket of new probe into the probe
interface of the Doppler.
NOTE:
Place the temporarily unused probe carefully
and avoid falling off, splash or stress, etc. When
the Doppler is not used for a long time, it’s
recommended to connect the probe to the
Doppler and keep them safely in the package.
3.4 Switching on
Press the POWER button on the front panel to
理邦保密文件
EDAN CONFIDENTIAL
To Next Page
Loading...
