SONOTRAX(2009) Series Ultrasonic Pocket Doppler User Manual
40
After the batteries are fully charged, install them
back to the Doppler.
WARNING
The battery charger should meet the
requirements of Standard IEC60950, and it
should be placed outside the patient
environment when it's working (1.5 m away from
the patient).
3.8.4 Charging NI-MH Battery Pack
When the NI-MH battery pack is low in energy,
charge the battery pack with the provided power
adapter.
1) Put the plug of the power adapter into the
charge socket of the Doppler (on the top
panel).
2) Connect the power adapter to a power
supply socket. During charging, a battery
sign appears on the LCD with continuous
changing energy sign, and the charging
indicator on the Doppler lights up.
理邦保密文件
EDAN CONFIDENTIAL
To Next Page
Loading...
Need help?
General
