SONOTRAX(2009) Series Ultrasonic Pocket Doppler User Manual
51
Click on File > Save, input the file name, select a
folder and click on Save to save the signals in a
“.wav” file.
To start a new recording, click on File > New.
4.3.2 Playing Sound Files
The recorded sounds are saved as waveform (.wav)
files in your computer.
You can play the waveform file with the sound
recorder. Run the sound recorder, click on File >
Open, search for the folder and select the file, click
on Open to load the file, and then click on the play
key .
If you have any other program that supports
waveform (.wav) files installed on your PC,
double-click on the file to play it.
4.3.3 Burning CD or Sending in Email
The waveform files saved in your PC are normal
audio data files. You can burn them into CDs or
e-mail to whomever you want.
4.3.4 Record Troubleshooting
If there is audio output from the speaker or earphone,
but the PC recorder does not have any input. (The
green line recording area has no waveform.) The
理邦保密文件
EDAN CONFIDENTIAL
To Next Page
Loading...
Need help?
General
