Eddyfi Technologies Ectane 3 - Calibration and Warranty Seals

11
ICES Compliance (Canada)
This ISM device complies with Canadian ICES-001(A).
Cet appareil ISM est conforme à la norme NMB-001(A) du Canada.
AS/NZS Compliance (Australia/New Zealand)
This device complies to the applicable regulations and standards for Australia (and New
Zealand) as defined by the Australian Communications and Media Authority (ACMA).
CE marking (EU)
Eddyfi declares that Ectane equipment complies to the essential requirements of
Electromagnetic Compatibility (EMC, 2014/30/EU), Low Voltage (LVD, 2014/35/EU) and
Restriction of Hazardous Substances (RoHS, 2011/65/EU, 2015/863/EU and 2017/2102)
directives.
Please find the full EU Declaration of Conformity on the Eddyfi website:
www.eddifytechnologies.com
UKCA marking (UK)
Hereby, Eddyfi declares that Ectane equipment complies to the essential requirements of
Electromagnetic Compatibility (EMC, S.I. 2016 No. 1091), Electrical Equipment Safety (S.I.
2016 No. 1101) and Restriction of Hazardous Substances (RoHS, S.I. 2012 No. 3032, and S.I.
2021 No. 422) Statutory Instruments.
Please find the full UKCA Declaration of Conformity on the Eddyfi website:
www.eddifytechnologies.com
7. Calibration and Warranty Seals
Calibration and warranty seals are located in the instrument and will be broken if parts of the
instrument are disassembled.
IMPORTANT: Broken seals void the calibration certification and product warranty.