– 8 –
Figures
Figure 1: Switch Front Panels 11
Figure 2: Rear Panel 13
Figure 3: Installing the Switch in a Rack 17
Figure 4: Connecting AC Power 18
Figure 5: Connecting DC Power 18
Figure 6: System LEDs 19
Figure 7: Console Port 20
Figure 8: Making a Connection to an RJ-45 Port 21
Figure 9: Switch Cooling (ECS2100-28P and ECS2100-28PP) 23
Figure 10: Switch Cooling (ECS2100-52T) 23
Figure 11: Switch Cooling (ECS2100-10T/10P/10PE, ECS2110-26T and ECS2100-28T) 23
Figure 12: Attaching the Brackets 25
Figure 13: Installing the Switch in a Rack 26
Figure 14: Attaching the Adhesive Feet 27
Figure 15: AC Power Supply Socket 29
Figure 16: Grounding Terminal 30
Figure 17: AC Power Cord and Power Socket 32
Figure 18: DC Power Cord and Power Socket 33
Figure 19: Port Status LEDs 36
Figure 20: Inserting an SFP/SFP+ Transceiver into a Slot 38
Figure 21: RJ-45 Connector 39
Figure 22: Making Twisted-Pair Connections 42
Figure 23: Making a Connection to an SFP/SFP+ Port 44
Figure 24: System LEDs 47
Figure 25: Console Port 48
Figure 26: Console Port Connection 49
Figure 27: Reset Button 50
To Next Page
Loading...
Need help?
General