Edge-Core ECW5110-L User Manual

Chapter 1 | Access Point Overview
Hardware Description
– 11 –
Figure 2: Rear View
RJ-45 Ethernet Port
The RJ-45 port labeled “Ethernet” provides a 1000BASE-T data and Power-over-
Ethernet (PoE) power connection to the unit. For more information, see “How to
Connect to the RJ-45 Port” on page 29.
Console Port
The port labeled “Console” provides an out-of-band serial connection to a terminal
or a PC running terminal emulation software. The port can be used for performing
unit monitoring and configuration. For more information, see “How to Connect to
the Console Port” on page 35.
Wall/Ceiling Mounting Options
The AP includes built-in mounting slots and clamps that can be used to mount the
unit on a wall (using the included bracket) or a ceiling T-rail. For more information,
see “How to Mount the Unit” on page 20.
1
2
3
4
Console Port T-rail Mounting Clamps
Wall Mounting Slots RJ-45 Ethernet Port
1
3
2
4

Edge-Core ECW5110-L Specifications

General

Brand	Edge-Core
Model	ECW5110-L
Category	Wireless Access Point
Language	English