Edimax AR-7211A - Snmp

43
3-6-6-5 SNMP
Click SNMP in the sub-menu to open the screen of Fig 3.7.7. In this page, you can set
the SNMP parameters.
Fig 3.7.7
Label
Description
Trap IP Address
Input the Trap Host’s IP here. The trap information
will be sent to this host.
Community
name(read-only)
The network administrators must use this password
to read the information of this router.
Community
name(write-only)
The network administrators must use this password
to configure the information of this router.
Apply Changes
Click this button to save the settings of this page.
Reset
Click this button to begin configuring this screen
afresh.