129
Set the transfer rate for multicast packets or use the “Auto”
setting.
Set the power output of the wireless radio. You may not
require 100% output power. Setting a lower power output can
enhance security since potentially malicious/unknown users
in distant areas will not be able to access your signal.
Set the beacon interval of the wireless radio. The default
value is 100.
Set the interval for keepalive messages from the AP to a
wireless client to verify if the station is still alive / active.
A wireless distribution system (WDS) is a system enabling the
wireless interconnection of APs in an IEEE 802.11 network. It
allows a wireless network to be expanded using multiple APs
without the traditional requirement for a wired backbone to
link them.
Enable / Disable VLAN function.
To Next Page
Loading...
Need help?
General
