EasyManua.ls Logo

Edwards CXS 160

Edwards CXS 160
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© Edwards Limited 2012. All rights reserved. Page 9
Edwards and the Edwards logo are trademarks of Edwards Limited.
Technical data
M518-00-880 Issue A
2Technical data
2.1 General technical data
2.2 Performance data
Table 1 - General technical data
Characteristics CXS / EH1200 CXS / EH2600 Units
Body dimensions length x width x height 1807 x 760 x 1374
1807 x 760 x 1770 (with FA)
1807 x 760 x 1572
1807 x 760 x 1967 (with FA)
mm
Mass (excluding packaging) 705
765 (with FA)
960
1010 (with FA)
kg
Noise level
(at ultimate with a piped exhaust)
< 75 < 75 dBA
Typical vibration level at inlet < 1.5 < 1.5 mm/s
Table 2 - General technical data
Item Description Rating Units
Operating conditions
Intended use Indoor/Outdoor
Ambient temperature range:
Operating -20
*
to 40 °C
Storage -45
*
to 55
*
For operation/storage in ambients below freezing ensure your cooling-water system is suitably protected
against freezing.
°C
Maximum relative humidity: 80% for temperatures up to 31 °C decreasing
linearly to 50% relative humidity at 40 °C
Maximum operating altitude 2000 m
Pollution degree 2 (IEC 61010)
Lubrication
Oil type - EH booster (hydrocarbon) Ultragrade 20
Oil type - CXS pump PFPE Drynert 25/6 (recommended)
Fomblin
®
25/6 (alternative)
Krytox
®
1525 (alternative)
Table 3 - Performance data
Pump
Characteristics
Typical peak pumping
speed
*
*
T3 variants without flame arresters
Typical ultimate
*
Maximum continuous inlet pressure
CXS250 + EH2600 1900 m
3
/h < 0.05 1000
CXS250 + EH1200 950 m
3
/h < 0.05 1000
CXS160 + EH1200 850 m
3
/h < 0.07 1000

Related product manuals