Declaration of Incorporation
We, Edwards Limited,
Crawley Business Quarter,
Manor Royal,
Crawley,
West Sussex, RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised to
assemble the technical file, that the machine(s)
EDP80 50Hz Bareshaft Assy A705-45-000 EDP80 60Hz Bareshaft Assy A705-47-000
EDP80 Service Module A705-45-008 EDP160 50Hz Bareshaft Assy A705-44-000
EDP160 60Hz Bareshaft Assy A705-46-000 EDP160 Service Module A705-44-008
EDP250 Bareshaft Assy A705-43-000 EDP250 Service Module A705-43-008
EDP400 60Hz Bareshaft Assy A705-41-000 EDP400 50Hz Bareshaft Assy A705-42-000
EDP400 60Hz Service Module A705-41-008 EDP400 50Hz Service Module A705-42-008
to which this declaration relates is intended to be incorporated into other equipment and not to
function independently. The machine(s) must not be put into service until the equipment into
which it is incorporated has been brought into conformity with the provisions of the Machinery
Directive, 2006/42/EC.
The machine(s) is in conformity with the following standard(s) or other normative document(s)
Compressors
EN1012-2:1996+A1:2009 Compressors and Vacuum Pumps. Safety Requirements. Vacuum
Pumps
EN13463-1:2009 Non-electrical equipment for use in potentially explosive
atmospheres. Basic method and requirements
EN13463-5:2011 Non-electrical equipment for use in potentially explosive
atmospheres. Protection by constructional safety ācā
and fulfils all the relevant provisions of
2006/42/EC Machinery Directive
The relevant essential requirements of the Machinery Directive 2006/42/EC Annex 1 have been
applied and fulfilled so far as practicable for this partly completed machinery. The relevant
technical documentation has been compiled in accordance with Annex VII Part B. In response to a
reasoned request by the national authorities, Edwards Ltd undertakes to provide relevant
information on the partly completed machinery (via email).
Note: This declaration covers all product serial numbers from the date this Declaration was
signed onwards.
10.08.2015, Burgess Hill
P200-06-400 Issue B
Mr Peter Meares
Senior Technical Support Manager, General Vacuum
Date and Place
This product has been manufactured under a quality management system certified to ISO 9001:2008
To Next Page
Loading...
