This product has been manufactured under a quality system registered to ISO9001
Declaration of Conformity
We, Edwards,
Crawley Business Quarter,
Manor Royal,
Crawley,
West Sussex, RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble
the technical file, that the product(s)
T-Station 75
T S 7 5 - X X – 0 0 X
The material numbers cover a family of products where the
following features may vary:- turbomolecular pump inlet flanges,
electrical supply and backing pumps.
Backing pumps:
E2M1.5
XDD1
to which this declaration relates is in conformity with the following standard(s) or other normative
document(s)
EN ISO 12100-2: 2003 Safety of Machinery. Basic Concepts, General Principles for
+ A1: 2009 Design. Technical Principals.
EN1012-2:1996, A1: 2009 Compressors and Vacuum Pumps. Safety Requirements,
Vacuum Pumps.
EN61010-1: 2001 Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use. General Requirements.
EN 61326-1: 2006 Electrical Equipment for Measurement, Control and Laboratory
Use. EMC requirements. General Requirements.
Industrial location, Class B Emissions.
EN50581:2012 Technical Documentation for the Assessment of Electrical and Electronic
Products with respect to the Restriction of Hazardous Substances
and fulfils all the relevant provisions of
2006/42/EC Machinery Directive
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility (EMC) Directive
2011/65/EU* Restriction of Certain Hazardous Substances (RoHS) Directive
* i.e. The product(s) contain less than - 0.1wt% for hexavalent chromium, lead, mercury, PBB and PBDE; 0.01wt% for
cadmium - in homogeneous materials (subject to the exemptions allowed by the Directive). The RoHS Directive does
not legally apply to industrial vacuum equipment until July 2019 (July 2017 for instruments).
Note: This declaration covers all product serial numbers from the date this Declaration was signed
onwards.
14.03.2013, Eastbourne
Peter Meares, GV Technical
Support Manage
Date and Place
P200-05-980 Issue B