Edwards T-Station 75 User Manual

D395-93-880
Issue A Original
Instruction Manual
T-Station 75
Description
Item
Number
Description
Item
Number
T-Station 75W NW40 200-230 V 50/60 Hz TS75W1001 T-Station 75D NW40 200-230 V 50/60 Hz TS75D1001
T-Station 75W NW40 100-120 V 50/60 Hz TS75W1002 T-Station 75D NW40 100-120 V 50/60 Hz TS75D1002
T-Station 75W ISO63 200-230 V 50/60 Hz TS75W2001 T-Station 75D ISO63 200-230 V 50/60 Hz TS75D2001
T-Station 75W ISO63 100-120 V 50/60 Hz TS75W2002 T-Station 75D ISO63 100-120 V 50/60 Hz TS75D2002
T-Station 75W CF63 200-230 V 50/60 Hz TS75W3001 T-Station 75D CF63 200-230 V 50/60 Hz TS75D3001
T-Station 75W CF63 100-120 V 50/60 Hz TS75W3002 T-Station 75D CF63 100-120 V 50/60 Hz TS75D3002

Edwards T-Station 75 Specifications

General

Brand	Edwards
Model	T-Station 75
Category	Water Pump
Language	English

Summary

Declaration of Conformity

Introduction to T-Station

Scope and Definitions

Defines the manual's scope and key terminology for T-Station operation.

Safety Warnings and Symbols

Explains warning/caution labels and general safety symbols used in the manual.

T-Station Product Overview

System Overview and Configuration

Describes the T-Station as a compact pumping system and its main components.

Major Component References

Lists major components and references to their specific instruction manuals.

Technical Specifications and Data

General and Environmental Specifications

Covers dimensions, IP rating, mass, operating/storage conditions, and sound level.

Electrical Connections and Data

Details electrical supply, connector types, power ratings, and wiring information.

Pumping Media and Materials

Specifies compatible gases, safety warnings for media, and materials exposed.

Vent Gas and Control Specifications

Provides vent gas requirements and control data for optimal performance.

T-Station Installation Guide

Safety and Component Checklist

Essential safety protocols and component checklist before installation.

Locating and Mounting the T-Station

Guidance on positioning, bench-top fixing, and initial pump preparation (oil fill).

System Connections

Instructions for connecting to vacuum and exhaust systems.

Electrical Connection and Configuration

Connecting electrical supply and configuring system settings like turbo pump delay.

Gauge Connection and Commissioning

Connecting a vacuum gauge and performing the final system commissioning tests.

T-Station Operation and Controls

Control Panel and Start-up

Description of the front panel, buttons, LEDs, and starting the system.

Menu Navigation and Core Screens

Details the menu hierarchy and functions for Turbo, Gauge, Vent, and TSP screens.

Advanced Screen Functions

Covers calibration procedures and unit settings for connected gauges.

Specialized Operational Modes

Explains gas-ballast control and system behavior during power interruptions.

System Maintenance and Troubleshooting

Safety and Maintenance Planning

Safety guidelines and a recommended maintenance schedule for the T-Station.

Inspection and Fault Finding

Procedures for inspecting connections, identifying common system faults.

Error Codes and Factory Defaults

Lists error numbers with meanings and steps to restore factory default settings.

Storage and Disposal of T-Station

Storage Guidelines

Procedures for storing the T-Station to maintain its condition.

Disposal Procedures

Instructions for the safe and environmentally compliant disposal of the unit.