Edwards T-Station 75

© Edwards Limited 2011. All rights reserved. Page 17
Edwards and the Edwards logo are trademarks of Edwards Limited.
Operation
D395-93-880 Issue A
4 Operation
CAUTION
To familiarise yourself with the vacuum pumps installed on your T-Station, it is advisable to read the relevant
instruction manuals (refer to Section 1.2.2).
4.1 Control panel description
Figure 7 - Front panel display
The LEDs along the top of the T-Station display indicate which menu screen is currently being shown on the numeric
display. To move to the next menu item press the NEXT key, and to return to the Turbo menu press the START/STOP
key. The available items are listed in order in Table 8.
4.2 Start up
When you apply power to the T-Station all LEDs in the display will light for 2 seconds to confirm operation. The
software version will then be displayed for a further 2 seconds. If you need to contact Edwards for support regarding
the T-Station, please have this software version number available.
WARNING
Do not attempt to move the T-Station while the Turbo pump is rotating. Doing so may cause severe
damage to the pump and could cause injury.
Table 7 - Front panel symbols and their functions
Key pad symbol Name Function
START / STOP
Turns the pumps on and off.
Returns to Turbo Menu Screen.
ENTER
Selects or confirms current menu option.
Controls active gauges.
NEXT
Moves to next menu.
Scrolls through menu options.
Table 8 - Menu items
Turbo screen
Gauge screen
Vent valve screen
Turbo set-point (TSP) screen
Calibrate gauge screen
Units screen