To reduce the risk of injury during installation and operation, read and follow the docking
station safety precautions and instructions in this manual. To reduce the risk of eye injury,
always wear close-fitting protective eyewear when installing the docking station. "
#
#
WARNING#
#
To reduce the risk of fire and electric shock, install the docking station's power cord in a
waterproof power socket and ensure that there is no risk that it may be immersed in water
or other liquids. Always install the docking station outdoors, on a stable, water-level
surface. "
#
#
WARNING#
#
Do not operate the docking station on a combustible surface or in a location where
combustible gases, liquids, vapors, dusts or other materials and substances are present. "
#
#
WARNING"
To reduce the risk of fire and electric shock, connect the docking station only to a
covered Class A GFCI receptacle that has an enclosure that is weatherproof with an
attachment plug cap inserted or removed. Do not use with receptacles that are
weatherproof only when the receptacle is covered (attachment plug cap not inserted and
receptacle cover closed). Ensure that the docking station is located in sufficient proximity
to reach a covered Class A GFCI receptacle with the power supply cord. Do not use an
extension cord. Use of extension cords are not authorized and increase the risk of electric
shock and fire. Always ensure that the power supply cord is out of the cutting path of the
personal robot."
There are 2 options to install the docking station:"
! 1) Install the docking station on your terrace or non-grass, hard and flat surface
(preferred installation method):"
• Place the docking station on the terrace or non-grass, hard and flat (water-level)
surface."
• Make sure there is a half-circle with 12 feet or 3 meter radius of clearance in front
of the docking station."
• Plugin the charger station power cord."
We recommend you to install the docking station on your terrace."
To Next Page
Loading...