#
• That there is a half-circle with 12 feet or 3 meter radius of clearance in front & sides of
the docking station, at all times during operation. As shown in following
illustration:"
• Make sure there is always a free path (no obstacles) to the grass in front of the docking
station."
• For longer service life, EEVE recommends installing the docking station in a protected,
shady location."
• For ease of working and to receive the software updates at all times, EEVE
recommends installing the docking station in a location with a strong WiFi
reception."
To charge the personal robot: "
•
Lift the personal robot and place it 30 cm before the charger, with its back towards
the charger. "
•
Push the personal robot backwards, into the docking station.#
The eyes of your personal robot light up after docking."
Please see following video on how to charge the personal robot:#
https://www.youtube.com/watch?v=YlrXu-mcPzk"
To Next Page
Loading...