12. For all electrical work, fuse the specified cables. Connect cables tightly and
clamp them securely to prevent external forces from damaging the terminal.
Improper electrical connections could overheat, causing fire and/or electrical
shock.
13. The unit and any solar modules must be properly grounded in accordance
with local electrical and building codes.
14. Compatible MC4 connectors must be used.
15. Use only the provided parts and accessories for installation. Using any non-
standard parts could result in water leakage, electrical shock, fire, or cause
the unit to fail.
16. Only install the unit in a location which can support the weight of the unit.
Failure to do so could result in the unit falling and injuring personnel or
damaging property.
17. In certain functional environments (such as kitchens and server rooms etc.),
the use of specially designed air-conditioning units is highly recommended.
18. If the supplied communication cable is damaged, it must be replaced by the
manufacturer, its service agent, or a similarly qualified person to avoid a
hazard.
DO NOT: Install the unit within 1 meter of any combustible materials.
DO NOT: Share the electrical circuit with other appliances. You must use an
independent power supply. An improper or insufficient power supply could cause
fire or electrical shock.
DO NOT: Allow any substances or gases to enter the unit when connecting the
refrigerant piping. The presence of other gases or substances will lower the unit's
capacity and may cause abnormally high pressure during the operation cycle.
This could cause an explosion and/or injury.
DO NOT: Allow children to play with the air conditioner. Children should be
always supervised around the unit.
DO NOT: Insert your fingers, rods, or other objects into the air inlet or outlet. The
fan within the unit could be rotating at high speeds and could cause injury.
DO NOT: Use flammable sprays such as hair spray, lacquer, or paint near the
unit. These could cause fire and/or an explosion.
DO NOT: Install or operate the unit in a room where it could be exposed to
excessive amounts of water (such as a bathroom or laundry room). Too much
exposure to water can cause electrical components to short circuit.
DO NOT: Expose your skin or body directly to the cool air coming from the unit
for a prolonged period of time.
DO NOT: Operate the air conditioner with wet hands. This could cause electrical
shock.
DO NOT: Turn on the power until the installation has been completed.
To Next Page
Loading...