NOTE: Changing temperature readout
The unit could ship with one of two remotes which look structurally the same. However, each
unit uses a unique sequence of button presses to change the temperature readout.
• Method 1: Press the TEMP Up and Down buttons simultaneously.
• Method 2: Power down the remote and hold both the TEMP Up button and the Fan button
simultaneously for ~5 seconds
.
8.8 MANUAL OPERATION
CAUTION: The manual control button is intended for
testing purposes and emergency operation only.
Please do not use this function unless the remote
control is lost and is absolutely necessary. To restore
regular operation, use the remote control to activate
the unit.
The unit must be turned off before the manual
operation function can be activated.
To Next Page
Loading...