EggRider V2 - Page 30

Options
Auto
Bafang
Lishui
Kunteng
Tonseng
ASI
Bafang Rx/Tx Swap
Lishui Rx/Tx Swap
Kunteng Rx/Tx Swap
Tonseng Rx/Tx Swap
ASI Rx/Tx Swap
Reset trip
It controls when the current trip is reset on the display. If Manually selected, the trip will reset only when
requested from the Dashboard page. When selected At start-up the trip will reset after every power cycle
but keeps the old trip information so it can be downloaded by the app until bike starts to move.
Options
Manually
At start-up
Immobilizer
NO LOCK
Default behavior, no action taken.
LOCKED LEVEL 0 (CONNECT WITH APP TO UNLOCK)
Display will always start locked in assist level 0. You have to connect with the mobile app to unlock to be able
to change the assist level or mode prole.
This is intended to cut-o the motor until connected with the mobile app. This setting will also be set if
display is locked from dashboard and then power o but it has to be expressly disabled from settings (on
dashboard can be disabled only temporary).
Road restrict
Option to inhibit changing prole from Road to ORoad with the
M
button on the display.
If set to Yes you can only change prole from ORoad to Road and based on the option use the mobile app for
both ways or also the display when the app is connected.
•
•
•
•
•
•
•
•
•
•
•
•
•
5.5.1 Preferred units
- 30/89 -
Copyright © 2019 EggRider.