EggRider V2 - 5.5 Display Settings

5.5 Display settings
5.5.1 Preferred units
It allows you to select units for measurement to specify various distance, speed and altitude. You could see
this in the mobile app and your display.
Options
Metric (km, m, kph=km/h)
Imperial (mi, ft, mi/h)
Secondary unit
It controls which value to show on the display main screen for the secondary unit.
Power, W
Current, A
Eiciency, wh/distance
Protocol
For each protocol type there are two options, one normal and one Rx/Tx Swap. The last one is to help when
the communications wires are inverted.
Accessible from menu Display Settings
•
•
•
•
•
When set to Auto the display will try to autodetect the protocol at the next startup.
Info
5.5 Display settings
- 29/89 -
Copyright © 2019 EggRider.