EggRider V2 - E-bike Settings; 6.1 Ebike Settings Overview

6. E-bike Settings
6.1 Ebike settings overview
The settings specic to the controller/ebike are visible after the rst successful connection to the display and
they show based on the protocol detection.
Settings in these pages are used for controller conguration and for prole switching between Road/ORoad
modes.
After a successful write, the settings are stored in the display memory as well as in the app's memory. Doing
this succesfully, settings will be visible even when the app is not connected.
Last update: May 4, 2020
6. E-bike Settings
- 41/89 -
Copyright © 2019 EggRider.