EggRider V2 - Page 33

5.5.2 BATTERY SETTINGS
EggRider has up to 3 battery proles. You can use these proles to track stats independently if you have more
than one battery.
Please be sure you are setting at least the battery selected prole correctly. You can leave the other battery
proles as they are by default if not used.
To maximize the battery percentage precision, please set the following elds correctly.
Battery used
Represents the battery prole to be used.
Options are 1st, 2nd and 3rd
Battery voltage
Oers some predened values to populate the Voltage 0% and 100%.
Options are 24V, 36V, 48V, 52V, 72V.
Voltage 0%
The empty battery voltage.
This eld has a resolution of 0.01 V.
Voltage 100%
The full battery voltage.
This eld has a resolution of 0.01 V.
If you think the speed measurement is not precise, you can use this eld as a factor to increase or decrease your speed
measurement.
Tip
Never connect EggRider to a battery bigger than 52V. EggRider display works up to 60V when directly connected. With certain
controllers we can overcome this limit by connecting to a 12V output.
Attention
Battery voltage drop down is just a helper with predened values for Voltage 0% and Voltage 100%. It is normal to go back to
Select.
Info
5.5.2 BATTERY SETTINGS
- 33/89 -
Copyright © 2019 EggRider.