Eighteeth Fast-Pack pro - Connecting Charge Base

4 Installing the Fast-Pack pro
11 / 31
4.3 Connecting charge
base
Plug the USB of adapter into the
charge base, and plug the other end
into a power outlet.
The Power LED on charge base will
light up.
NO TE
Only the original adapter could be
used.
Put the handpiece all the way into
the charge base, the charge state
will show on the screen.
NO TE
Put the handpiece into the charge base
in the right direction, otherwise the
handpiece will not be charged.
If only need a base to put the device
on dentist element of dental chair
(without charge function),
handpiece base is recommended to
use instead of charge base.
Power LED