Eighteeth Fast-Pack pro - Use Interface; Interface Overview and Controls

5 Use Interface
12 / 31
5.Use Interface
1
2
3
① Main switch
② Display Screen
③
Power switch
Turn Power On
Long press
Change Memory
Shot press
to change temperature memory from T1
to T5
Memory Parameter Setting
During standby state, holding down press
then
press
for 2 seconds to enter memory parameter
setting. Parameter T1 to T5 can be set independently.
Heating
Long press
Turn Power Off
Long press
for more than 2 seconds.
Advanced setting
During power off state, holding down press
then
press
to enter advanced setting. Press till
target setting, press
to adjust, then press to
confirm.