6 Setting
14 / 31
6.2 Advanced Setting
During power off state, holding down press
then press
to enter advanced setting, the
“AutoPowerOff” will appear on the display
screen. Press
to adjust, the auto power off
time can be set to 5, 10 and 15 minutes.
Press
to confirm.
Press again, the “Beep Volume” can be
changed. Press
to adjust, the “Beep Volume”
can be set to 0, 1 and 2.
Press
to confirm.
Rest oreSe t t ings
NO YES
Press again, the “RestoreSettings” can be
changed. Press
to adjust and press to
confirm.
If choose “YES”, all the setting parameters will be
covered by factory settings.
Press again, confirm the setting need to save
or not. Press
to adjust and press to save
and power off.