Eizo ColorEdge CX241 User Manual

11
Chapter 1 Introduction
1-3. EIZO LCD Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk contents
and the overview of the software programs.
●
Disk contents and software overview
The disk includes application software programs for adjustment, and User’s Manual. Refer to “Readme.txt” or
the “read me” le on the disk for software startup procedures or le access procedures.
Contents Overview Windows Macintosh
A “Readme.txt” or “read me” le √ √
ColorNavigator
*1
Software for calibrating monitor characteristics
and generating ICC proles (for Windows) and
Apple ColorSync proles (for Macintosh).
(A PC must be connected to the monitor with
the supplied USB cable.)
√ √
ColorNavigator Elements
*2
Software for adjusting the color and brightness
of the monitor while comparing a picture
displayed on the monitor with a printed picture.
(A PC must be connected to the monitor with
the supplied USB cable.)
√ √
Screen adjustment pattern les Used when adjusting the image of the analog
signal input manually.
√ -
User’s Manual of this monitor (PDF le) √ √
*1 Only ColorNavigator Licensed models
*2 Only ColorNavigator Non-Licensed models
●
To use ColorNavigator / ColorNavigator Elements
Attention
• A license is necessary to use ColorNavigator. If “ColorNavigator License” in the monitor information window (page 52)
is “Not Registered”, the ColorNavigator license must be purchased and registered to the monitor.
• ColorNavigator Elements can be used without a license.
Refer to the corresponding User’s Manual on the CD-ROM disk in order to install and use the software.
When using this software, you will need to connect a PC to the monitor with the supplied USB cable. For
details of the USB cable connection, see “8-2. Making Use of USB (Universal Serial Bus)” (page 51).

Eizo ColorEdge CX241 Specifications

General

Brand	Eizo
Model	ColorEdge CX241
Category	Monitor
Language	English