44
Chapter 6 Power Saving Functions
6-5. Setting DisplayPort Power Save
This function allows you to change the power setting of the DisplayPort of the monitor.
Attention
• For the “On” setting, the position of the window may be changed when the signal is switched. In such a case, turn the setting
to “Off”.
Procedure
1. Press
to turn off the monitor.
2. Holding
down, press for at least two seconds to turn on the monitor.
The “Optional Settings” menu appears.
3. Choose “DP Power Save” from “Optional Settings”, and press .
4. Select “On” or “Off” with
or , and press .
5. Select “Finish” with
or .
6. Press
.
To Next Page
Loading...
