16
Setup
Perform Initialization
This section describes settings to display network camera images on the monitor.
Note
• Initial settings can be made from the Web browser of a computer connected to the same network.
For details on setting from a Web browser, refer to the "Installation Manual".
●
Log In
1.
Select (Login).
The login screen is displayed.
Login screen
Login
2.
Enter “Username” and “Password”.
1. Enter the user name and password shown below and then press .
Username: "admin"
Password: "admin"
Note
• The above user name and password are the default settings.
Entering characters
• When entering using a USB mouse
Clicking an item that requires characters to be input, such as a text box, will display a software keyboard.
When the focus is moved out of the software keyboard, the software keyboard is hidden.
• When entering using a USB keyboard
Entered characters are displayed in the text box.
To Next Page
Loading...
Need help?
General