To Next PageTo Next PageHow to remove flickering or blurring on Eizo FlexScan S2133-BK Monitor screen?
To remove flickering or blurring on the whole screen of your Eizo monitor, use the “Phase” setting in the Setting menu to adjust it.
What causes afterimages on Eizo FlexScan S2133-BK?
Afterimages are particular to LCD monitors. To prevent afterimages on your Eizo monitor, avoid displaying the same image for a long time. Use the screen saver or power save function to avoid displaying the same image for extended periods.
Why auto adjustment function does not work on Eizo FlexScan S2133-BK Monitor?
The auto adjustment function on your Eizo monitor does not work during digital signal input. This function is intended for use on the Macintosh and on AT-compatible PC running Windows. It does not work properly when an image is displayed only on a part of the screen or when a black background is in use. This function also does not work correctly with some graphics boards.
Why “Smoothing” on the Setting menu “Screen” cannot be selected on Eizo Monitor?
You cannot choose “smoothing” when the screen is displayed in the following resolutions or settings: The resolution is 1600 × 1200, the resolution is 800 × 600, or Screen Size is “Normal”.
Why Green / red / blue / white dots or defective dots remain on Eizo FlexScan S2133-BK screen?
This is due to LCD panel characteristics and is not a failure.
What to do if Interference patterns or pressure marks remain on Eizo Monitor screen?
If interference patterns or pressure marks remain on the screen, leave the monitor with a white or black screen. The symptom may disappear.
General| Screen Size | 21.3 inches |
|---|---|
| Resolution | 1600 x 1200 |
| Panel Type | IPS |
| Brightness | 300 cd/m² |
| Contrast Ratio | 1000:1 |
| Speakers | No |
| Color Support | 16.7 million colors |
| Aspect Ratio | 4:3 |
| Viewing Angles | 178° horizontal / 178° vertical |
| Response Time | 6 ms |
Details key monitor features, panel type, viewing angles, and specialized functions like FineContrast.
Explains the front and rear controls, buttons, indicators, and their respective functions.
Lists disk contents and software overview, including ScreenManager Pro and ScreenSlicer.
Guides on displaying and operating the setting menu, adjusting values, and exiting.
Lists supported resolutions for analog, DVI-D, and DisplayPort inputs, including dot clock and frequency.
Provides step-by-step instructions for setting screen resolution in Windows and macOS.
Covers color modes, advanced adjustments (brightness, contrast, gamma, hue, saturation, gain), and color reset.
Details screen adjustments for analog inputs, including auto-adjustment, clock, phase, and position.
Explains how to change screen size (Full Screen, Enlarged, Normal) and adjust border intensity.
Describes enabling/disabling DDC/CI for interactive communication between PC and monitor.
Explains how to lock monitor control buttons to prevent accidental changes.
Guides on changing the setting menu orientation for vertical display and rotating the screen.
Allows users to choose to show or hide the EIZO logo displayed on monitor startup.
Instructions on how to reposition the on-screen display menu on the screen.
Describes how to select the preferred language for the setting menu and messages.
Provides procedures to reset color adjustments or all settings back to factory defaults.
Explains how to activate power saving modes based on PC status and signal input.
Allows users to turn the monitor's power indicator light on or off.
Covers Auto EcoView and EcoView Optimizer 2 for automatic brightness adjustments based on ambient light/input signal.
Shows how to view power reduction, CO2 reduction, and eco performance levels via the EcoView menu.
Details setting the automatic power-off timer to turn off the monitor in power saving mode.
Addresses problems with the monitor not powering on or displaying an image, and power indicator status.
Covers common image issues like brightness, blurriness, afterimages, dots, noise, and interference patterns.
Addresses specific imaging issues related to digital signal inputs, like DP HotPlug function.
Addresses specific imaging issues related to analog signal inputs, like position and flickering.
Covers miscellaneous issues like setting menu access, smoothing function, auto adjustment, and USB device functionality.
Provides instructions on how to attach optional arms or stands, including VESA standard compliance.
Illustrates connection examples for multiple PCs and explains how to switch between input signals.
Details the required system environment and setup for the monitor's USB hub functionality.
Shows how to access and display monitor information such as model name, serial number, and usage time.
Lists detailed technical specifications, including panel size, resolutions, power, and dimensions.
Provides factory preset analog signal timing data for various resolutions and signal types.
Lists registered trademarks and logos associated with the EIZO brand and its products.
Mentions the origin of the bitmap font used in the product.
Confirms the product's compliance with ENERGY STAR guidelines for energy efficiency.
Declares the product's compliance with FCC rules for Class B digital devices.
States the product's compliance with Canadian ICES-003 standards for digital apparatus.
