Eizo FLEXSCAN T1751

20
Chapter2AdjustingScreens
●
To adjust color temperature <Temperature>
Color temperature can be adjusted.
The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value.
The value is expressed in degrees “K” (Kelvin).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the ame
temperature. A gain preset value is set for each color temperature setting value.
Adjustable range
Off, 5000K, 6500K, 9300K
Procedure
1. Choose <Color> from the Adjustment menu, and press
.
2. Choose <Temperature> from the <Color> menu, and press
.
The <Temperature> menu appears.
3. Use or for adjustment.
4. Press
to exit the adjustment.
Note
• <Gain> allows you to perform more advanced adjustment (see “To adjust gain <Gain>” (page 20)).
• If you set to “Off”, the image is displayed in the preset color of the monitor (Gain: 100% for each RGB).
• When gain is changed, the color temperature is changed to “Off”.
●
To adjust gain <Gain>
The brightness of each color component red, green, and blue is called “Gain”. You can change the hue of
“white” by adjusting gain.
Adjustable range
0 to 100%
Procedure
1. Choose <Color> from the Adjustment menu, and press
.
2. Choose <Gain> from the <Color> menu, and press
.
The <Gain> menu appears.
3. Adjust gain with or for each of red, green, and blue.
4. Press
to exit the adjustment.
Attention
• Using this function may make some color gradations unavailable for display.
Note
• The value of gain changes with that of color temperature.
• When gain is changed, the color temperature is changed to “Off”.