Eizo FLEXSCAN T1751

17
Chapter2AdjustingScreens
5.
Adjusting color gradation.
●
To adjust color gradation automatically <Range>
Every color gradation (0 to 255) can be displayed by adjusting the signal output level.
Procedure
1. Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern les”.
2. Choose <Auto Adjustment> from the Adjustment menu, and press .
3. Choose <Range> from the <Auto Adjustment> menu, and press
.
The <Range> menu appears.
4. Select <Execute> with or , and press .
The output range is set automatically.
5. Close Pattern 2.
6.
Modify blurred characters or lines.
●
To modify blurred characters/lines <Smoothing>
When an image is displayed with a resolution other than recommended, the characters or lines of the
displayed image may blur.
Attention
• Smoothing setting may not be required depending on the display resolution. (You cannot choose the smoothing icon.)
Adjustable range
1 to 5
Procedure
1. Choose <Screen> from the Adjustment menu, and press
.
2. Choose <Smoothing> from the <Screen> menu, and press
.
The <Smoothing> menu appears.
3. Use or for adjustment.
4. Press
to exit the adjustment.