EKOM DK50 - 12. Placement of the Compressor

DK50
NP-DK50 simple s DE-4_06-2020 - 18 - 06/2020
12. PLACEMENT OF THE COMPRESSOR
The device shall only be installed by a qualified professional.
Keep the fixation screws for possible later transport of the compressor.
 Unwrap the compressor from the packaging.
12.1. Removal of transpor stabilizers
Unscrew four screws M6 from the bottom
part of the device marked with red warning
washer.
Fig. 2
Securing the casters
A compressor equipped with casters must
first be secured to prevent it from moving
before starting the compressor.
Lock the casters!
Fig. 3
Installing feet
Compressor models equipped with feet must
have the feet installed following the provided
illustration.
Fig. 4