ELAN HOME SYSTEMS TS10 User’s Guide
© ELAN Home Systems 2010 | All rights reserved.
Page 12
Security (Continued)
Security Arming / Disarming
To arm or disarm the system, select the partition to arm or disarm and press the button on
the right for the alarm mode you want to engage. The display will change to the number
pad to allow the code to be entered. Press ENTER to complete the arming/disarming
process or CANCEL to halt the process.
The display will change back to the status screen and display the current alarm mode for
the selected partition.
Figure 3-12:
Security
Arm/Disarm
Figure 3-13:
Security Alarm
Mode
To Next Page
Loading...
Need help?
General